The LG LCAP21A monitor charger is one of the most efficient products on the osx site. This LG LCAP monitor charger has 1/2 and 21 amps. You can now order this product from anywhere in Iran. Your order will be shipped immediately upon registration by OSX.
LG LCAP 21A 1 / 2V monitor charger:
Using the main and first-class adapter for the monitor is essential. This adapter can transfer current and voltage uniformly.
The LG monitor adapter is 1/2 volt 21 amp LCAP21A model for LG monitors. This adapter requires a 3-pin power cable to connect to two power outlets. The LG 1/2 volt 21 amp LCAP21A monitor adapter is produced in the dimensions of 27 × 43 × 104 mm and weighs 231 grams with good build quality and durable body.
This monitor adapter has an input voltage of 100 to 240 volts and has a power consumption of 48 watts and is sold in OSX.
Full specifications of LG LCAP21A monitor charger:
Weight: 110 grams
Output voltage: 19 volts
Input voltage: 100-240 volts
Compatible with LG monitors
Input current intensity: 1.5 amps
Dimensions: 27 × 35 × 86 mm
Output current intensity: 1.7 amps
Tips on buying a monitor adapter:
1- Professional evaluation of monitor adapter:
Some use the weight of the adapter or the plastic color of the body as a measure of quality. It is true that many low quality adapters are light weight, but there are many low quality adapters on the market that have ideal weights in different ways. In any case, appearance is not a testament to quality.
2- Check the monitor adapter head:
It is possible to use an adapter with another brand but with the same voltage and amp for the monitor and no damage will be done to the device. You should know that the adapter does not have any unique technology and its only function is to supply power with a specific voltage and amp. Therefore, it is only necessary that the voltage heads and voltage and amperage match. This is important because if the charger plug is not locked inside the port, there is a possibility of short circuit, resulting in overheating and damage to the device.
3- Monitor voltage and amp adapter:
The most important issue is the matching voltage and amp of the monitor adapter. If the adapter voltage is higher than the monitor, the monitor board will heat up quickly and the smell of burns will rise from the board. Therefore, the most important point is the exact voltage matching. If the amp of the monitor adapter is higher, nothing special will happen and the monitor will not be damaged. But if the amp of the adapter is less than the monitor, it will damage the board of the device.
Methods to prevent damage to the charger and adapters:
The first and most important cause of damage to adapters is power fluctuations. This damage can be prevented by placing an electrical shield in the charger.
The second factor is the constant folding, knotting and crumpling of the adapter cable, which causes the charger to fail. The copper cable breaks and bends after a certain number (up to several thousand times). And the possibility of small disconnection and the occurrence of short circuit connection and as a result absorbs a large amount of current from the adapter (so-called draws amps) and causes the adapter to burn.
The third factor is the use of cables and 3 to 2 poor quality electricity. Also, the quality of interface cables is of very low quality due to the thinness of the strands and the lack of copper in the alloy of the strands. Using these cables creates the same short circuit phenomenon and causes serious damage to the monitor adapter.
The health of all OSX site products is guaranteed by our experts. Buy the LG LCAP 21A 1 / 2V monitor charger right now.
